• Microsoft Vista Home Networking Setup and Options
The most daunting part of upgrading to Windows Vista may be trying to figure out where in the layers of menus the networking and file-sharing options are hidden.
• Tips for Securing Your Home Router
Seemingly minor and easily overlooked settings can still have profound security implications. Here are some steps you can take to make sure your wired or wireless home router — and by extension, your network — is as secure as possible.
Most Popular Reviews
• Microsoft Windows Home Server
If you have a home network, you'll welcome the easy file sharing, remote access and the image-based backup features of Windows Home Server.
• Iomega StorCenter Network Hard Drive
Iomega's fourth generation StorCenter Network Hard Drive brings many of the features found in higher-end storage devices down to an attractive price.
• MikroTik's The Dude
This free tool delivers many of the same capabilities that you'd find in pricey network monitoring tools. As long as you don't mind tinkering, The Dude is a decent network utility that should be worth the download.
Linksys FEFW11P1 Etherfast Wireless Router with Print Server
Page 2
Author: Tim Higgins Review Date: 5/29/2001
Wireless Features
The P1's wireless capabilities come via an 802.11b radio card inserted into a PCMCIA slot in the rear of the router. The card is the WPC11 (reviewed here), which is based on the Intersil PRISM II chipset. There's no installation process for the card, other than inserting it into the P1 before you power it up.
All of the P1's wireless settings are accessed via one screen. Both 64 and 128 bit WEP encryption is supported, and up to four 64 bit or one 128 bit hexadecimal keys can be entered. A nice feature not usually seen on 802.11b routers/Access Points in this price range is the Access Permissions setting. This is not the same as the Access Control routing feature, but instead controls whether a wireless client is allowed to connect to the LAN at all. Control is via MAC address, and you can block or allow everyone, or allow up to 20 specific wireless clients to connect.
As is typical with wireless routers, you don't get wireless network monitoring capabilities. You can see (via the Device/LAN status screen) the IP and MAC address of all DHCP clients connected to the P1, but you can't tell which clients are the wireless ones. You also can't see the state (active, roaming, etc.) of clients, nor can you access any Network statistics (error rate, packets sent/received, etc.).
Wireless Performance
Wireless testing was done using a Linksys WUSB11 USB wireless adapter (reviewed here) as the wireless client, and a Windows PC as the other LAN client.
Both clients are on the LAN side of the router, so these tests do not include the router. Here are the results:
Router Performance
I also used Qcheck to test routing performance:
[Tests run with 1.0 Release 12 firmware]
Test Description
Qcheck Transfer Rate (Mbps)
[1Mbyte data size]
Qcheck Response Time (msec) [10 iterations 100byte data size]
Comment: Routing Transfer rate shows that the P1 is definitely a different animal than the W11S4. Although slower than many current generation routers, the speed should be fine for most Broadband connections. NOTE that LAN-WAN Transfer rate dropped to about 2.4Mbps when I put the LAN side machine in DMZ.
UDP stream performance once again shows that the router is straining to keep up at the 500kbps rate.
Summary
Although priced lower than some Access Points, and about the same as their W11S4 wireless router (reviewed here), the P1 trades a print server for built-in switched ports. You can't attach booster antennas, as you can with the W11S4, and the routing performance is not as good either.
Given all the factors, I'd give the nod to the W11S4 over the P1 if the choice were only between the two. Lucky for you that there are plenty of other wireless routers to choose from!
28.3% | 
71.7% | out of 46 reviews 
