• Microsoft Vista Home Networking Setup and Options
The most daunting part of upgrading to Windows Vista may be trying to figure out where in the layers of menus the networking and file-sharing options are hidden.
• Tips for Securing Your Home Router
Seemingly minor and easily overlooked settings can still have profound security implications. Here are some steps you can take to make sure your wired or wireless home router — and by extension, your network — is as secure as possible.
Most Popular Reviews
• Microsoft Windows Home Server
If you have a home network, you'll welcome the easy file sharing, remote access and the image-based backup features of Windows Home Server.
• Iomega StorCenter Network Hard Drive
Iomega's fourth generation StorCenter Network Hard Drive brings many of the features found in higher-end storage devices down to an attractive price.
• MikroTik's The Dude
This free tool delivers many of the same capabilities that you'd find in pricey network monitoring tools. As long as you don't mind tinkering, The Dude is a decent network utility that should be worth the download.
If you've done everything correctly, ICS should
show this screen to indicate that it's ready to go. Click
OK to continue
Where is this thing? You access ICS' controls via the Internet Options Control
panel. When ICS is installed, you'll see the addition of
a new Sharing button on this Control Panel as shown below.
Clicking on the Sharing button brings up the ICS Control
Panel. As you can see below, there's not a lot you can
do. No control of logging, no ability to open special ports,
no control over Client network access (other than to shut off
ICS), no control over ICS' DHCP server. (We suggest checking
the "Show Icon in Taskbar" box so that you'll be reminded
that ICS is running and be able to easily access its Control Panel.)
HELP!
Note the HELP button in the above screenshot. Clicking
on it will bring up ICS help. You may find some useful information
there, but I thought that most of it wasn't much help. The Client
machine setup information wasn't much help and was confusing because
it referred to the LINKLOCAL 169.254.X.X addresses, when ICS uses
the 192.168.0.X series of address for the LAN.
Fortunately, Microsoft has a few helpful articles in its Knowledge
Base that can help you figure out whether ICS has installed correctly.
In particular, Q236465
- Description of How ICS Appears in Network Properties
tells you what your Network Control Panel should look like after
you install ICS. For links to other MS Knowledge Base articles,
check the ICS Troubleshooting
page. SOHOinter.net also has a ICS
debugging page that tells you how to check ICS' install
logs.
Is
this thing on?
You're probably excited to get started sharing, so go ahead and
try your browser on your sharing Client computers. If, however,
things don't work, you may want to see if ICS installed properly.
Check for the following things on the computer where you installed
ICS.
If you check out the Network Control Panel,
you'll see some new additions:
a new Internet Connection Sharing adapter
copies of a new Internet Connection Sharing
protocol installed and bound to each of your Network adapters
ICS protocols Added
a copy of TCP/IP installed and bound to the
new Internet Connection Sharing adapter
the copy of TCP/IP that is bound to the adapter
that you selected to Connect to the Internet in the ICS
setup wizard will be marked with (Shared).
the copy of TCP/IP that is bound to the adapter
that you selected to Connect to your home network in the
ICS setup wizard will be marked with (Home).
TCP/IP modifications by ICS
Run winipcfg and you should find an ICSHARE
adapter replacing your cable modem NIC as shown below. You
should see the information assigned by your ISPs DHCP server.
If you don't, ICS isn't set up properly. You can try
clicking the Release then the Renew button to see if you can
get a DHCP lease, but you'll probably have to reinstall ICS
to get things working.
Finally, bring up the Network Control Panel
and check the Properties for the copy of TCP/IP that is bound
to your LAN NIC. It should be assigned an IP of 192.168.0.1,
with subnet mask 255.255.255.0
If your network settings don't look like what is described above,
try uninstalling and reinstalling ICS. Make sure
you uninstall ICS via the Add/Remove Control Panel and not just
by deleting the ICS adapters in the Network Control panel. If
ICS still doesn't work, you can try
this procedure if you're comfortable editing the Registry,
or you can try reinstalling WinMe, then reinstalling ICS.
If after checking all this, you still can't access the Internet
from your other computers, you probably will need to check the
TCP/IP and Internet application settings for your Client computers.
Go to this page to do this.
Tip:
Take another look at the ICS Control Panel above.
You can specify a primary network adapter and a secondary
network adapter! This feature lets you share the
Internet connection with two different LAN segments! Go to this page
to see how to do it.
Tip:
Take another look at the ICS Control Panel above.
You can specify a primary network adapter and a secondary
network adapter! This feature lets you share the
Internet connection with two different LAN segments!
Go to