NETGEAR RT311 and RT314 Gateway Routers
Version 3.22

This note describes enhancements and bug fixes incorporated in the RT311
and RT314 RAS software version V3.22. The enhancements and fixes are those
added since the previous
RAS software release V3.20.

  ------------------------------------------------------------------------

New Features Overview
=====================
- Port Forwarding Available in Browser-Based Configuration
It is no longer necessary to user Telnet to configure Port Forwarding,
which can now be configured in the browser-based configuration menus.

- Longer User Name Allowed in PPPoE
More characters are now allowed when configuring the PPPoE User Name from
the browser-based configuration menu.

- Revised Manual Available
An updated Reference Manual is available on Netgear's Web site.

Other notes
===========
1. By default, incoming TELNET, FTP, and HTTP requests arriving at the WAN
port are rejected. To allow these requests, remove the filter #3 selection
from Input Filter Sets in the Remote Node filter set menu (internal Menu
11.5), or modify filter #3 to allow the desired services.

2. When using NetMeeting behind NAT to connect to an outside user, the
outside user will see two identical users in screen.

3. MIRC version 5.31 is supported. This software does not support MIRC DCC
after version 5.31.

Modifications and Bug Fixes
===========================
1. Added Australia support.

2. PPPoE would previously crash if more than eight service names were
listed.

3. ViaVideo support added.

4. Added Port Forwarding setup in Web configuration.

5. Added Long PPPoE username support.

6. Telnet Menu 1: changed 'Configure Dynamic DNS' to 'Edit Dynamic DNS'.

7. Added Outgoing Authentication in Menu 11.1.

8. Fixed NAT failure if IP Address changes on renewing DHCP Client info.

9. Modify the FTP server’s RAS code file attribute.

10. Fixed ICMP and traceroute packet loss in NAT mode.

11. Fixed Tracelog bug that caused system hang.

12. Dropchute support added.

13. Fixed bug causing ICMP packets with data size over 1474 to be dropped.

14. Modify DDNS update mechanism to save update timestamp and update IP
address.