******************************
Section A. UPGRADE INSTRUCTION
******************************

For users of Microsoft Windows, please run SMCAWBR193k2.EXE
directly. It will search the Router on your LAN and ask
you to type system password. Just type in the password
and click "Upgrade" button. It takes about 30 seconds
to finish the whole procedure.

For users of other platforms, please refer Section D for
platform-independent upgrade.


**************************
Section B. WARNING MESSAGE
**************************

The files will upgrade the firmware of your Cable/DSL 
Router to version R1.93k2.

1. NOTE! DO NOT POWER OFF THE UNIT WHEN THE UNIT IS BEING
   UPGRADED, OR THE UNIT MAY BE DAMAGED.

2. The configuration will not be changed. You need not
   configure it again.


*************************
Section C. CHANGE HISTORY
*************************

*** R1.93e0 TO R1.93k2

1. Solve the compatibility problem between this device
   and a 2Mbps wireless card.
   
2. Bug fixed: when Wake-up address is empty and "Wake-up" 
   button is clicked, all checkboxes on "Misc Item" page 
   will be unchecked.
   
3. Fix a bug that cause the wireless don't work when 
   WAN type set to "Dial up"

*** R1.93a1 TO R1.93e0

1. Add a feature to send Wake-on-LAN frame from LAN or
   WAN side.

2. Allow user to edit the MAC Address of the WAN port.

3. Support IP Fragment pass through.

4. Fix a bug of IPsec pass-through handling that causes
   key exchanging problems.

5. Solve incompatible issue with ETHome Cable.

6. Solve the TCP session timeout problem of ssh (port 22)
   and telnet (port 23).

7. Enlarge timeout for print server to solve some printing
   problems.

8. Allow the AppleTalk packet to transmit and receive between
   Wireless and Wired LAN

9. Solve the incompabile problem with the Orinoco WLAN card on Linux.

10. Bug fixed: when "Wake-up" button is clicked, all 
    checkboxes on "Misc Item" page will be unchecked.

11. Port number of each access control group is increased
    to 30.