Linksys Firmware Revision History
(Applies to: BEFSR11, BEFSR31, BEFSRU31)
========================================

1.38.2 Mar. 3,01
================
1. fix Forwarding LAN PPTP server problem
2. fix DNS relay under PPPoE dial on demand disconnected problem
3. change Forwarding LAN server IP range from 0~254 to 0~255

1.38.1
======
1. add MTU(maximum transmission unit) function in "Filter" page
2. modify Korea DHCP problem: if router does not has host name, send WAN MAC as
hostname to get ip 
3. add "Port Triggering" function in Forwarding page
4. fix DNS relay under PPPoE problem.
5. fix DNS relay under DMZ setting problem.
6. support multi-LAN-host using same port to connect to same server

1.38
====
1. SPI feature added to the filers page
2. Cisco VPN disconnect addressed

1.37.1
======
1. PPPOE Time out addressed

1.37 T1
=======
1. Add DNS relay function: Router will set itself as DNS server and reply to
DHCP client before it get the WAN IP setting.
2. The DHCP lease time change to 1 day, the original setting is 6-day.
3. Add Keep Alive function for RAS
4. Add delete DHCP client entry function in DHCP Table page.
5. Modify incorrect PPPoE alert message problem.
6. Japan NTT PPPoE login problem under PAP and CHAP auth.
7. MSS ICMP message packet pass through.
8. QuakeII Game disconnect problem.
9. PPPoE fragment problem for IPsec pass through to solve Cisco VPN problem

1.37
====
1: Modified PPP idle time to 15 sec.

1.36.T6 Dec 8,00
================ 
1: Add the RAS function
2. Modified PPP idle time to 10 sec.
3. Add a “MAC Address Clone” page
4. Fixed NEWS server connection problem
5. Add a Note message in “Setup” page for PPPoE and RAS
6. Modified the HTTP module

1.36.t5 Dec 5,00
================
1. modified LCP_request time to avoid the timeout issue.(different from 36.S9
and does not have RAS) Bell South-Miami.

1.36.s9 Nov 29,00
================ 
1. RAS Plan: When choose 256k, it will show 256k even refresh.
2. RAS help is in the setup help.
3. More detail is in the RAS help.

1.36.t4 Nov 9,00
================
1. fixed Forwarding protocol problem.
2. fixed lost connection of SSH problem.
3. support multicast traffic - FTP downloads

1.36.t3 Oct 31,00
=================
1. Fixed system lock up when filter is setted 
2. Fixed press "Continue" cann't go back to pre-setting page problem

1.36.T2 Oct 26,00
=================
1. Keep the DHCP Table when system reboots.
2. Change the size of incoming log table from 200 to 70. 
3. Broadcast ping problem (response src IP is wrong)
4. Broadcast trap IP problem.
5. WIN CE DHCP problem (UDP checksum error)
6. TFTP upgrade password length problem.
7. Add protocol selection in Forwarding page
8. Add protocol selection in Filter page
9. Add MAC Filter in Filter page(50 entries)
10.Move Log page to first banner.
11.Modified the access log message to import to Excel

1.36 Oct 5, 00
==============
1. firware now supports BEFSRU31 
2. Address other VPN issues.